Home Reno – Turning off the water

When I got home from work, I decided to make sure I could shut off the water to our house. I didn’t want any surprises tomorrow when we gutted the ½ bathroom. I knew where the tap was, but never had the need to turn it off. Until now.

The tap was very stiff, but I managed to turn it a dozen times until until it turned no more.

We turned on the tap in the bathroom and the water flowed freely. This was definitely not what one would expect with the main tap being turned off.

I had a look around the basement for another tap. Nothing.

This one had to be the one. It was attached to a pipe coming up through the concrete floor. The pipe was very cold. There was no doubt. I turned it back on again. And off again. We tested the basement taps near the washing machine. We still had water. WTF?

I tried turning off the tap leading to the hot water heater and then turned on the hot water tap at the sink. No water. I turned it back on. The pipe leading to the hot water tank comes from this main tap, so I was 100% sure this was the main source and all leading to this sink.

I swore a lot. My wife asked me to stop swearing. I told her I needed to swear.

I turned the main tap off again… as tight as it would go. I was afraid that it might snap off.

I walked over to the sink and turned on the cold water.

It dribbled out. Success!

I guess the stubborn tap, having not been used for such a long time, just needed loosening up… or something.

I ran up to the bathroom and tested its taps. They too stopped working.

I turned the main back on until tomorrow.

One problem overcome… with persistence and a lot of swearing. It is now beer:30.

Bring on tomorrow.

Home reno 101

I don’t consider myself to be a contender for Canada’s Worst Handyman, but I am also far from being a home renovation expert.

I always get nervous when trying new reno projects for the first time. 99% of the time, they go well, but there’s always that 1% taunting me that I’ll mess it up.

We’ve been doing a main floor reno since January. What started off as simply “replacing this old carpet” has turned into…

• removing carpet from all stairs, sanding, staining and finishing steps (done)
• installing ceramic tiles on the risers (done)
• repainting the stair stringers (done)
• removing all baseboards on the main floor, stair landings and upstairs hall (done)
• repainting the upstairs hall, stairs case walls – upper and lower – living room and dining area (done)
• removing carpet in the living room and dining area and replacing it with laminate flooring, including a ½" plywood subfloor
• removing old laminate floor in entrance, kitchen and ½ bathroom and installing porcelain floor tile, also including a ½" subfloor and removal of old vanity
• installation of new baseboard throughout all affected areas
• possibly installing crown moulding in living room and dining area

The two parts of this project that I have never “experienced” are:

• Gutting a bathroom and installing a new vanity and sink, including the removal and reinstall of a toilet and cutting pipe copper pipe
• Installing porcelain floor tiles

The vanity happens to be the original vanity installed back when this townhouse was built in the 1970s. It has no shutoff valves on the plumbing underneath the sink. Thankfully the toilet appears to be newer and does have a shutoff valve installed, so that’s one less thing to do (or screw up)

I’ll be taking the easier route and won’t be welding any pipe once I cut the old ones. I have the braided hose with pressure fittings and shutoff valves. One day I’ll take on the welding task, but for now, easy is key for me.

Wish me luck.

Things that I remember about my Dad

I remember once when we were visiting friends of our family, we were in the backyard playing badminton... it was hot and I asked him for a sip of his beer. I must have been like 11 or 12 years old. He let me have a sip and I remember not liking it.

One morning, when I was really young, my Mother woke us up and warned us that my Father had been in a fight the night before. He got punched in the face by some thieves breaking into a car in downtown Montreal. He thought they locked themselves out of their car and checked to see if they needed help. Not his brightest moment. He was greeted with a punch to the face, breaking his dentures and causing a deep cut above one of his eyes that required stitches. For weeks, while he waited for new dentures, he had to eat soft food. He got the soft toast in the morning. He called it his "wallopy bit".

His favourite beer was Molson Export.

He had THE smelliest feet ever. After a day of work, his feet could stop a herd of bull elephants in their tracks. And kill them.

He had a mole, dead center, on his back. It looked like a Jelly Tot stuck to his back.

I remember the first time my Dad said "Fuck". We were driving in our car and some kid threw a snowball at it. It startled him and he said something like "What the fuck was that?". It was eerily quiet in the car after that, when he realized what he said. The second time I heard him say it was when I visited him at work one day. Someone came into his office to ask about some changes on a set of plans, or something like that, and he mumbled "They don't know what the fuck they're talking about..."

My Dad was my best man at my wedding. On the morning of my wedding, I was sitting in the Minister's office talking to the Minister while we waited for my Dad to arrive. He was late. Apparently, in all of the confusion of who was driving who, and when, my Dad was forgotten. When he finally arrived, he rushed into the Minister's office, wiping the sweat from his brow, and said "Jesus, it's hot out there!" He then noticed the Minister, remembered where he was, and said “Oops… sorry!”. The Minister responded, "That's ok, we say that a lot around here."

He would always wear his kilt on New Year's Eve. I have a picture somewhere of him wearing it to walk our dog, one New Year's Eve.

I remember cutting off all contact with him after he left my Mother and all of their debts. As a result, he never got to meet either of my children. He lived in Louisiana, so it wasn't too difficult. Still, it’s not something I’m proud of.

I remember calling him when he was in the hospital, in the days before he passed away, and letting him speak with his 3½ year-old grandson for the first time. It was also the last time. I heard later that he was so happy.

 

My Dad passed away after a very short battle with liver cancer and all the hell that goes in December 1998. If you have a few bucks to spare, please make a donation in support of my participation in the Canadian Cancer Society’s Relay for Life scheduled for June 18th. Any amount is greatly appreciated, thanks!

Click here!

Week 31 - Super Cub

Super Cub
Originally uploaded by Twister65

This week's Project 52 photo is my Hobbyzone Super Cub.

Back in April of 2007 I took up a new hobby of flying electric R/C planes. My first plane, the Hobbyzone Firebird Freedom, despite being a "beginner" plane, was quite difficult to fly and resulted in a lot of frustration and purchasing new wings and a tail.

Not long after, I decided to get a new plane: the Hobbyzone Super Cub. This plane flies like a dream. It is the ultimate beginner plane and is so much fun to fly. Many days that spring and summer were spent up at a nearby school, flying it with a friend and my brother in-law, both of whom also had R/C planes. I even rigged up a small digital video camera to record in-air footage and put a bunch of videos up on YouTube.

After logging a lot of air time with the Super Cub, I was finally able get my first plane in the air and keep it flying, now that I was more comfortable with correcting for wind and my own errors.

We didn't go flying as much the following year, and not at all in 2009. I had attempted to change the battery connections in the winter of 2008 to something more stable than the Tamiya connectors, but failed due to my crappy soldering iron. I never did get around to fixing it that year, even though I had also picked up a couple of batteries last year in anticipating of flying.

I have decide that this year, I will get back to flying. I bought a new soldering iron and this evening, I fixed up the connections. Hopefully those two batteries I bought are still good and I may have been able to salvage one battery from a couple of years ago. We'll see if it holds a charge.

This was the last video I made of my plane in August 2007.

Future Shop pre-order fail

What is the benefit of pre-ordering something before its release?

In my mind, I think it is so you can be one of the first to get your hands on it when it becomes available.

Am I wrong?

Let’s assume that I am right.

So, why does Future Shop and Best Buy accept pre-orders for new video game releases and then NOT ship the damned things on their official release date, or at least the day after?

Last summer, I pre-ordered Batman: Arkham Asylum for the Xbox 360. The official release date came and went. My order was stuck in “in progress” limbo for almost a month before it shipped.

Along came Final Fantasy XIII. Screw Best Buy. I pre-ordered it from Future Shop a few days before the official release date to get $5 off the price (Yes, I realize that Best Buy owns Future Shop but I was hoping for a better experience this time… apparently I was wrong)

On its release date (Tuesday), I posted a question on the Future Shop fan page on Facebook:

Scott Paterson How soon do the online pre-orders ship? The last time I pre-ordered a game from "that other" store, it took a MONTH after the game's release before it shipped. The only reason I didn't cancel it was because it was on sale. I'm rrreally hopin' Future Shop is different.

I got a prompt reply:

Future Shop @Scott: It should be shipping on the day of release which should be today.

As of noon today, the order status on Future Shop’s web site still indicated “In progress” and “Out of stock”.

I posted three replies in the thread since Tuesday and there hasn’t been any response from the Future Shop rep in that group. My last message said that I would cancel the order at noon if it still hadn’t shipped.

Guess what I just did.

Week 30 - Rideau Falls, Spring 2010

Rideau Falls, Spring 2010 (30/52)
Originally uploaded by Twister65

I drove out to Rideau Falls on Saturday morning hoping to snap a few shots of massive ice chunks flowing over the edge, as it did around this time in 2007. I guess the milder winter played a large part in disappointing me this year, or maybe missed it?

Week 29 - Winter Wonderland?

Winter Wonderland?
Originally uploaded by Twister65

After many days of spring-like weather, last Thursday evening gave us this. It was gone by the weekend. Crazy weather.

Yes, I'm a day late. I watched the Canada vs. USA gold medal game on Sunday and enjoyed a few too many beers celebrating Canada's victory. :)